G5 Voodoo Neo 6 + 2 x DI Driver 4 Bundle
G5 Voodoo Neo 6 + 2 x DI Driver 4 Bundle
Everything needed to run direct injection with Link: the G5 Voodoo Neo 6 ECU paired with two Link DI Driver-4 modules. Each DI Driver-4 drives four high-voltage peak-and-hold direct injectors plus a high-pressure fuel pump, so this bundle covers up to 8 direct injectors.
The G5 Voodoo Neo 6 handles the engine control and talks to the DI Driver over CAN, so you tune everything from PCLink with DI Link for driver setup.
In the box
| In the box | 1 x G5 Voodoo Neo 6 wire-in ECU (156-5000) 2 x DI Driver-4 direct injection controller (144-5000) |
|---|
G5 Voodoo Neo 6 specifications
| Outputs | 12# Injection Drives Injection Drives can run Direct Injection via a driver box 8 Ignition Drives 6 Auxiliary Outputs +5V Sensor power supply Unused Injection and Ignition drives can be used as an Auxiliary Outputs |
|---|---|
| Inputs | 10# Digital Inputs 4 Temperature Inputs 3 Analogue Inputs 2 Trigger Inputs 2 Knock Inputs Unused Temperature and Analogue Inputs can be used as Digital Inputs |
| Inputs and outputs | 6 ADIO Dual Purpose |
| Communications | 2 CAN Bus Channels 1 Wi-Fi USB-C Tuning Connection 1 Ethernet 1 Power Over USB |
| Data Logging | 1GB Onboard Logging Memory 100kHz Maximum Total Logging Rate 250 Logging Channels |
| Electrical | Operating Voltage Range: 6-30V Maximum Input Voltage: 30V Maximum Continuous Current Draw: 17A |
| Product Dimensions | 107mm(L) x 158mm(W) x 45mm(H) 4.21in(L) x 6.22in(W) x 1.77in(H) |
| Product Weight | 730 grams (25.75 ounces) |
DI Driver-4 specifications
| Inputs and outputs | Four Direct Injection Injector Drives One High Pressure Fuel Pump Drive |
|---|---|
| Communications | 1 CAN bus with software configurable termination. 1 USB Type-C for configuration via DI Link software. |
| Electrical | Operating Voltage Range: 7-30V Maximum Input Voltage: 36V Maximum Continuous Current Draw: 10A Max Boost Current: 17.9A, Max Boost Voltage: 65V Max Peak Current: 17.9A, Max Peak Duration: 2ms Max Hold Current: 5.0A, Max Hold Duration: 164ms Max engine RPM running a Bosch HDEV: 14,200RPM |
| Product Dimensions | 103.6mm(L) x 86.3mm(W) x 39.0mm(H) 4.08in(L) x 3.40in(W) x 1.54in(H) |
| Product Weight | 438 grams (15.45 ounces) |
| Material | Sealed CNC billet aluminium enclosure |
Genuine Link Engine Management part. Link part number: 156-9200B.
Judkin3D is an authorized Link ECU dealer in West Palm Beach, FL. Pair it with professional tuning: in-shop or remote, with a fresh base map built for your engine and performance goals. Not sure this is the right part for your build? Book a free 30-minute consultation.